CGDI BMW Newest Test Report & Review

CGDI BMW come with OBD, FEM/BDC and CAS4+ function by default, no need pay extra, it is cost-effective BMW key programmer for DIY user. Here we collect some test report and review from customers, hope it is helpful for you.

CGDI BMW Prog Test Report:
cas4 F10 – ok (new key)
cas4+ F10 – ok (new key) isn from org key or dump DME
fem/bdc F31 – ok – reset mileage, change isn, change vin, make keys with oryginal key and with dump from DDE
cas3+ E60- ok , downgrade and make key with isn from org key
CGDI PROG bmw f20 2014 mileage reset OK
Read ISN DME MSD80 OK 5WK93628
program bdc key via obd for bmw x6 ok!
add key to bmw x5 successfully
program key to 2016 BMW 5-series ok
program key for BMW 523Li OK
Program BMW FEM all key lost done!
program FEM for F30 328 2013 ok
programing orignal key for BMW 325 ok
add new key to BMW 3 series ok.
program bmw m3 key done!
Cas 2 – E60 2005 lost key – Obd – not working ( no option to program from dump)
Cas 3+ E87 2008 spare key – eeprom dump – ok
F10 – key from dump – OK
F10 LCI – key from dump and isn from working key – OK
F10 LCI – key from dump and isn from DDE – OK
E60 LCI – downgrade CAS3+ and key via OBD – OK

CGDI Prog BMW Review and Feedback:
CGDI for BMW can reprogram EGS for 2009 for BMW x5.
CGDI Prog for BMW supports for BMW 650i 2003 all key lost.
CGDI for BMW can read and write the ISN EWS egs for BMW M5 F10 dct gearbox 2013. Can read from DME and write into egs.
CGDI PROG for bmw f20 2014 mileage reset OK
Read ISN DME MSD80 OK 5WK93628
Excellent tool so far. no bricks or problems.
extremely fast for cas1, 2 & 3
for cas3+ if need downgrade 10 minutes and seems safe.
make sure you have proper power on the car

You can reuse an old key and reprogram it, there is a button that says unlock key. I tried and worked with aftermarket key, did not try on a original for BMW key to unlock(tested on e60 cas2)
and yes it is safe if downgrade for CAS3+.

Read ISN form MSV80 result OK
Read and write ISN cas 3 result OK

Did a 2008 E60 CAS3+ had to DOWNGRADE it took about 10min and programmed key successfully

Did a 2008 E60 528i it asked for Downgrade it took around 10min no error codes all perfect key works

Instructions for cas4 F10 key programming:
Cas4 can only be done by reading DFlash from Freescale cpu then load into programmer software and generate key. It can no ne done by obd.
You need xprog or vvdi prog to read the dflash.

CGDI BMW package newly add Reading 8 Foot Chip Free Clip Adapter for free