How to Install Ikeycutter Conder XC-Mini Key Cutting Machine Cutter and Clamp

Install the cutter
1. Put the cutter into the cutter hole and to the top limit position, ensure the
section of cutter and clamp lateral parallel
2. Turn the CUTTER LOCK SCREW clockwise till the cutter is tightened.

xc-mini-key-cutting-machine-install-cutter-clamp-1

To Remove the Cutter
1) Hold the cutter lightly, Turn the CUTTER LOCK SCREW counterclockwise
2) after the cutter loosen, remove it

xc-mini-key-cutting-machine-install-cutter-clamp-2

To Install the Clamp
1) Turn the LOCKING WRENCH counterclockwise on the left side to loosen.
2) Choose the clamp according to the key type, Push the clamp from the right side of the
CLAMP CARRIAGE to limit position
3) Turn the LOCKING WRENCH clockwise to tighten the clamp

xc-mini-key-cutting-machine-install-cutter-clamp-3

This is from Carkeydeal: Best car key tools for sale website Key Cutting Machine technical support: How to Install Ikeycutter Conder XC-Mini Key Cutting Machine Cutter and Clamp