How to new key key with CGDI MB

CGDI MB programs new key when all keys lost

– test all keys lost on w164, need gateway.

Tested w212 ALL KEY LOST !!! In car, done by OBD
Work really good!
W212 is from 2012
Read ezs About 30mins
Upload data
Querry
Password given

Read eis info
Paste key password
Save
Then key calculation

– CGDI MB tool works good to do W207 W204 lost keys on bench.

W204 get data: About hour
PSW W204: 11minute all key lost in bench with VVDI cable
had VVDI and CGDI,CGDI is faster and no problem to get PSW:

Question: when we have CGDI tool working all by OBD why lads want the tool to work on the bench???

Answer: For example if car is some further from workshop and you must spent time driving to the car or customer is just TOO far to drive, so then he can sent EIS or drive by himself bringing EIS it with him at workshop. It’s time saver and what if tool will not work via OBD? You will loose many time driving ex. 30 miles x2. If you have on bench, you can work at your place without risk of wasting time. Also calculating psw at the place of car might last 30 minutes, 1 hour in all keys lost? It’s much time to sit in the car + you have to take care of battery charger. If you have on bench, you can drink a coffee or a beer if you want and enjoy the waiting time
Still no tool which can do all merc by OBD anyway…

– W203 with W209 EZS all key lost, done in the car about 70mn: Successful.

– Calculation PSW always the first time, never fail.

-Plug USB to computer, software recognizes at once. So I take 2 used BE key put in and read. Software say need 12V.

So I plug 12V and read and reset to unused quickly. Will test on bench W209 as key lost later.

CGDI MB tested failure and explanation from CGDI engineer:

CGDI work not on all by OBD
W906 Sprinter don’t work (CGDI Supports W906 only CAN BUS not K-line)
W230 SL55 AMG 2006 dont work (CGDI supports W230 CAN BUS, you can send EIS and CGDI MB tool to factory to add K-line)

-Trying reading W209 EZS on bench need zgw connected also for w211 , w203.

Write renew NEC chip by IR.
But for now, tested renew 3 chips, remote dead after renew. Try write on adapter, IR or NEC prog. All the same result.
Here is video write by IR original NEC renewed :

https://www.youtube.com/watch?v=gyLY1MyGP64&feature=youtu.be

More CDGI PRO: http://www.carkeydeals.com/producttags/CGDI+Prog/