How to Use Toyota G and H Chip OBD Remote Key Programmer

Toyota G and H Chip OBD Remote Key programmer can program Toyota G and H chip (4D/67/68/72(G)) car transponder directly via OBD diagnostic socket. No software, laptop or other accessories required. No need to take parts from vehicles.

 

Function:

Add transponder key or remote for Toyota vehicle with Toyota G and H (4D/67/68/72(G)) chip. not for all key lost.

 

Vehicle coverage:

1996-2015 Toyota cars with H or G chip

Successfully test on a 2015 Toyota Camry

toyota-g-h-chip-vehicle-obd-remote-key-programer-blog-1

toyota-g-h-chip-vehicle-obd-remote-key-programer-manual

How to Use Toyota G and H Chip OBD Remote Key Programmer?

Easy 5 steps:

Step 1:

Get in the car and close the door. Insert the original key and turn switch ignition to “ON” position.

toyota-g-h-chip-vehicle-obd-remote-key-programer-step-1

Step 2: 

Switch to “ADD TRANSPONDER” and insert the key programmer device into OBD connector. You will hear two beep sound(Dee-Dee), it will start to add the remote.

toyota-g-h-chip-vehicle-obd-remote-key-programer-step-2

Step 3:

After two beep sound, you will hear continuously beep sound, the device indicator light will flash during the procedure.

toyota-g-h-chip-vehicle-obd-remote-key-programer-step-3

Step 4:

After the sound (Dee-Dee), open the door, when hear the sound blaring. Press “Lock & unlock” key at the same time. And press the “lock” key. If the blaring ends, it’s OK.

toyota-g-h-chip-vehicle-obd-remote-key-programer-step-4

Insert the new transponder, no need to turn it, the indicator light will turn into flash.

Step 5:

The indicator will turn off after 60 seconds, then it’s done.

toyota-g-h-chip-vehicle-obd-remote-key-programer-step-5

This is from Carkeydeal: Best car key tools for sale website technical support: How to Use Toyota G and H Chip OBD Remote Key Programmer