Plug-and-Play TOYO KEY PRO OBD II on Toyota 40/80/128 BIT (4D, 4D-G, 4D-H) All Key Lost

TOYO KEY PRO OBD II Features:
1, This TOYO KEY PRO OBD II Can work alone, it’s plug-and-play.
2, Works on 40/80/128 BIT (4D, 4D-G, 4D-H)
3, You can use this device to match 2 master keys and 1 valet key.

Using Steps / How to use TOYO KEY PRO?

1. Insert the key into the ignition lock.

2.Plug the TOYO KEY Pro OBD-II  adapter  into the car.

3. When you hear the beeps for the first time, pull out the key and insert the key again.

4. When you hear the beeps again, it means the first key is matched successful. Meanwhile the immobilizer light is on and the car enters the matching mode.

5. Pull out the first key , then insert the keys which need to be matched one by one.

6. If the  immobilizer light goes out, that means all work done and you can start the car.

7. If the  immobilizer light is on all the time, use any key on-off it for 5 times to finish matching.