What does SKE-LT Smart Key Emulator do?

Many people have no idea of what does SKE-LT Smart Key Emulator do.  So in this artical i will tell you what function can it perform while working with Lonsdor K518ISE key programming tool.

With SKE-LT emulator, you can use Lonsdor K518ISE to program new keys to Toyota/Lexus via OBD, without dismantling when all keys are lost.

SKE-LT emulator supports smart keys with chip 94/D4, chip 88/A8, chip 98, chip A9 and Chip 39 (128bit)

Black:SKE-LT-DST40(94/D4) -Supports 94/D4 smart key.

Red: SKE-LT-8A(88/A8)-Support 88/A8 smart key.

Green: SKE-LT-DST80(98)-Supports 98 smart key.

Blue: SKE-LT-8A(A9)-Supports A9 smart key.

Orange: SKE-LT-DSTAES-Support Chip 39 (128bit) Smart Key

Good News: From 18th Sep to 24th Sep,2018, buy K518iSE+ SKE-LT Smart Key Emulator can get free orange SKE-LT. Only USD1348 free shipping 

Reliable source: http://www.carkeydeals.com/wholesale/lonsdor-k518ise-key-programmer-plus-ske-it-smart-key-emulator.html

Ske-Lt-smart-key-emulator Introduction

Press and hold the power button for 2 sec to turn on/off; In start status, when standby for 2 min, the key will automatically shut down; After switching 3 times, the key will be initialized, and can be recycled again.
Status indicator: Blue-normal; Red-hardware failure;
After receiving the product, please open the back cover of each emulator and install battery first before using it.

Steps to install battery:

How to use SKE-LT-smart-key-emulator?

Step 1: Binding

Go to the “Bind emulator key” function;
Turn on emulator key and put it into K518ISE key slot (put the status indicator down, make sure the key is active);
Following the system direction and click “OK” to start binding;
After binding completed, the system will indicate”Binding successful”.

Step 2: Backup EEPROM data

Connect K518ISE with car OBD port, enter into “Backup immodata” to back up the data.

Step 3: Make emergency emulator key

After choosing the immo data, in a network environment, the system will indicate to choose the corresponding SKE emulator key model, please start the key and put it into K518ISE key slot(make sure the key is activate), follow the instruction to make an emulator key.

Step 4: Add smart key

Click the car start button, put the generated SKE emulator key close to the start button, with induction the car will automatically activated.

The system will read current key count, then follow the instruction to add key.

Kindly note:

1.“Bind emulator key”can identify the SKE emulator key binding state;

SKE emulator key need to bind K518ISE host and can bind only for one time;
When making emulator key, make sure well net connection and to choose the corresponding SKE emulator key model correctly.

Video: Lonsdor K518iSE with Emulator to do Toyota LEXUS ES200 All Key Lost via OBD